在执行此操作之前,先检查系统上的 IP 信息:
# ifconfig 或 # ip addr -
enp0s3: flags=4163 mtu 1500 inet 192.168.56.201 netmask 255.255.255.0 broadcast 192.168.56.255 inet6 fe80::a00:27ff:fe97:132e prefixlen 64 scopeid 0x20 ether 08:00:27:97:13:2e txqueuelen 1000 (Ethernet) RX packets 7 bytes 420 (420.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 294 bytes 24747 (24.7 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -
enp0s8: flags=4163 mtu 1500 inet 10.0.3.15 netmask 255.255.255.0 broadcast 10.0.3.255 inet6 fe80::344b:6259:4dbe:eabb prefixlen 64 scopeid 0x20 ether 08:00:27:12:e8:c1 txqueuelen 1000 (Ethernet) RX packets 1 bytes 590 (590.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 97 bytes 10209 (10.2 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -
lo: flags=73 mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10 loop txqueuelen 1000 (Local Loopback) RX packets 325 bytes 24046 (24.0 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 325 bytes 24046 (24.0 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
如我所见,服务器主 IP 地址是 192.168.56.201 ,所以,我将下一个 IP 192.168.56.202 作为辅助 IP,使用以下命令完成。
# ip addr add 192.168.56.202/24 broadcast 192.168.56.255 dev enp0s3
运行以下命令来检查是否已分配了新的 IP。当你重启机器时,它会消失。
# ip addr 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp0s3: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:97:13:2e brd ff:ff:ff:ff:ff:ff inet 192.168.56.201/24 brd 192.168.56.255 scope global enp0s3 valid_lft forever preferred_lft forever inet 192.168.56.202/24 brd 192.168.56.255 scope global secondary enp0s3 valid_lft forever preferred_lft forever inet6 fe80::a00:27ff:fe97:132e/64 scope link valid_lft forever preferred_lft forever 3: enp0s8: mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 08:00:27:12:e8:c1 brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global dynamic enp0s8 valid_lft 86353sec preferred_lft 86353sec inet6 fe80::344b:6259:4dbe:eabb/64 scope link valid_lft forever preferred_lft forever
如何在 Ubuntu 16.04 LTS 中添加永久辅助 IP 地址
要在 Ubuntu 系统上添加永久辅助 IP 地址,只需编辑 /etc/network/interfaces 文件并添加所需 IP 的详细信息。
我们不应该在 dns-nameservers 行之后添加辅助 IP 地址,因为它不会起作用,应该以下面的格式添加 IP 详情。
(编辑:ASP站长网)
|